Glastify Protective Glass UVTG+ 2 pcs for Galaxy S22 Ultra

Glastify UVTG+ protective glass is made of lightweight and milled AGC glass with a thickness of only 0.28mm.
During production it was tempered at 420°C, so the surface hardness reaches 9H level, which ensures the highest level of protection in everyday use and absorbs impact force.

UVTG+ is bonded with liquid material across the entire screen surface, and then the material is cured with the help of a UV lamp. This combination provides an ideal effect of smoothness, transparency and sensitivity on the curved screen.
The glass is precisely made and fully functional. Please note that you receive 2 glass pieces in the set.

Glastify brand glasses need no further introduction, as they are the absolute top in the screen protection category.

* The glass is compatible with most cases on the market, the cutout is adapted for cases.
** Please note that after applying the glass, the fingerprint recognition function must be removed and added again, if available.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom, right after a shower - water vapor will absorb dust from the air and will not interfere with installation.
2) Level the phone so that it lies flat, otherwise the glue will run off the phone and installation will fail.
Do not forget to cover the top speaker with the sticker from the set.
3) Thoroughly clean the surface with an alcohol-moistened wipe, then polish with a dry cloth.
4) Remove dust with the help of the sticker.
5) Unscrew the main cap (the glue will not flow) and place the tube exactly in the center of the screen, then carefully unscrew the top cap (the glue will start to flow).
6) Remove the protective layer and place the glass on the screen; if you place it crookedly, you can freely slide it while the glass floats on the screen.
Wait a dozen seconds until the glue fills the entire glass surface.
7) Using the UV lamp, cure the glass in each zone for 10 seconds.
8) Clean the phone from glue residue and add fingerprints again.

PRODUCT FEATURES:
- 100% original
- Packed in original packaging
- 9H hardness
- Adapted for curved screen
- Milled 2.5D edges, pleasant to the touch
- Hydrophobic layer
- Oleophobic layer
- Perfectly clear
- Does not reduce touch sensitivity
- Dimensions: 159x74mm

SET INCLUDES:
2 x Glastify glass
1 x Installation set